Focus on the manufacture of freezer/refrigerator/home appliances/and equipment with LED light bar/lamps 1. Low temperature: minus 25℃ lighting environment 2. High temperature: 80℃ lighting environment 3. Customization: special lighting/customized structure

Product Features 1. Using 1/2 aluminum-plastic tube structure, exquisite appearance and good heat dissipation effect. 2. Built-in constant current drive, high efficiency and stability. 3. Using SMD LED as the light source, high light efficiency and long life. 4. The response time is fast, and the LED response time is nanoseconds. 5. Environmental protection, no heavy metals and harmful gases. 6. Energy saving, 65% energy saving than traditional fluorescent lamps. 7. No stroboscopic, fast start, soft light, eye protection. 8. Easy to install and easy to use.

Specifications and models: T5, T6, T8, T10, T12, etc Light source chip: Crystal 2835 LED lamp beads for light, energy saving than incandescent lamp 80% Lamp brand: Philips, OSRAM, Hongli= Service life: up to 50000 hours Input voltage: AC100-240V 50 / 60Hz

The structure of the Livestock lighting-T6 Three anti-light lamp body is made of waterproof stainless steel screws, and the inside is filled with excellent performance sealant. The outer layer is tightly wrapped with a waterproof silicone sleeve, double-layer waterproof, and the protection level is IP65/IP67.,

Queendom LED grows crops indoors for the farm, and LED lighting plays an important role in the growth of plants in the indoor environment. With multiple Oslon LEDs, some of the best sprouts have been grown. 660 nm (ultra-red light) and 450 nm (deep blue) LED components

High-purity aluminum+PC Waterproof rating: IP44, IP54, IP65, IP67 operating temperature: -40°F (-40°C) to +65°F (+10°C).

Full spectrum ratio: 6000K/3000K/red/blue 5:1/ 5:2/ 3:1/ 1:1 High-purity aluminum+PC

Three proofing lamp [waterproof lamp tube] refers to the three proofs of waterproof, dustproof and anticorrosion. Special anti-oxidation and anti-corrosion materials and silicone sealing ring are used to meet the protection requirements of lamps.

The control circuit and the RGB chip are integrated in a 5050 packaged component to form a complete external control pixel. Built-in signal shaping circuit, any pixel point receives the signal after waveform shaping and then output, to ensure that the line waveform distortion will not accumulate. Built-in power-on reset and power-down reset circuits.

 PLCC-4 package.  Intelligent reverse connect protection, the power supply reverse connection does not damage the IC.  The control circuit and the LED share the only power source.  Control circuit and RGB chip are integrated in a package of 5050 components, form a complete control of pixel point.  Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate.  Built-in electric reset circuit and power lost reset circuit.

Led plant lamps have been extended to a complete set of solutions including a variety of lighting modules. Guangdong Zhengfa queen series products are specially designed and developed for horticultural production. In addition to stable and reliable quality, LED products also have the characteristics of long life, efficient thermal management, high efficiency, waterproof and dustproof.

Technical description: high quality nickel cadmium battery, battery capacity, continuous charge and discharge 500-1000 times; ◎ unique integrated lamp / emergency LED light source, energy saving, service life up to 100000 hours; ◎ switching power supply control circuit is adopted, with stable performance and can be used in loose voltage environment; ◎ flame retardant PC material, fashionable appearance;

The main function of the fire emergency ceiling lamp is to be used for lighting in emergency situations. Therefore, high-performance rectifiers and lamps are used in the design and manufacture, which can ensure that the light loss of the fire emergency ceiling lamp is reduced in the use process, and the brightness attenuation process of the lamps is very slow. Therefore, the fire emergency ceiling lamp has a very good performance in luminous efficiency, In the event of an accident, it can provide enough brightness and range of lighting to speed up the evacuation speed

T10 three proof lamp Three proofing lamp [waterproof lamp tube] refers to the three proofs of waterproof, dustproof and anticorrosion. Special anti-oxidation and anti-corrosion materials and silicone sealing ring are used to meet the protection requirements of lamps. The lamp carries out anti-corrosion, water-proof and anti-oxidation treatment on the circuit control board. In view of the weak sealing and heat dissipation ability of the electrical box, the intelligent temperature control three proof lamp special working circuit is designed,